GE
Display Module or Power Supply Degradation
Display is very dim, flickers, or segments are missing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED/LCD display, Low voltage from control board power supply, Loose display connector, Heat damage behind control panel
How to Fix / Troubleshooting
Safety first: Unplug the smoker before accessing the control panel.
- Check connector: Remove the control bezel and verify the display module connector is firmly seated on the control board.
- Inspect for heat damage: Look for discoloration or warped plastic behind the display area. Ensure no insulation or foil is blocking ventilation.
- Test on different outlet: Plug the smoker into a known-good outlet to rule out low line voltage.
- Replace display or board: If the display remains dim or incomplete, replace the display module or the entire control board assembly as specified for your model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements