Old Smokey Display / LED Module Degradation

Old Smokey electric smoker digital display is dim, flickering, or partially unreadable, but the smoker still heats.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Aging LED or LCD display, Loose display connector, Failing display driver on control board, Moisture behind display window

How to Fix / Troubleshooting

Safety first: Unplug the smoker before opening the control panel.

Steps to improve or restore display:

  • 1. Inspect the display window: Clean the outside of the display lens with a soft cloth. Check for condensation or moisture inside.
  • 2. Access the control panel: Remove screws and gently pull the panel forward to expose the display module and its connector.
  • 3. Reseat connectors: Disconnect and reconnect the display ribbon cable or plug to ensure a solid connection.
  • 4. Dry moisture: If moisture is present, allow the panel to air dry completely before reassembly.
  • 5. Replace the control module: If the display remains dim or segments are missing, the display or its driver circuit is likely failing. Replace the OEM control board/display assembly.

Note: Even with a weak display, do not operate the smoker blindly. Use an external thermometer and timer until the display is repaired.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Digital Control Board / Display Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements