Pit Boss
Display Module Failure
Display is blank or segments are missing, but smoker still heats.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LED/LCD display, loose display connector, cracked display PCB, control board display driver fault
How to Fix / Troubleshooting
Safety first: Unplug the smoker before opening the control panel.
- Check contrast/brightness (if applicable): Some models have a small adjustment; refer to the manual.
- Inspect connectors: Reseat the connector between the display and main control board.
- Look for cracks: If the display board is cracked or segments are permanently missing, replace the display module / control panel assembly.
- Control board driver: If a new display does not fix the issue, the display driver on the main control board may be faulty and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements