Smokin-It
Display Backlight / Low-Voltage Display Supply Failure
Controller display is blank or very dim but smoker still heats
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed display backlight LEDs, Loose display connector, Weak low-voltage regulator on control board, Moisture damage to display PCB
How to Fix / Troubleshooting
Safety first: Unplug the smoker before removing the control panel.
Steps:
- Check contrast/brightness (if available): Some controllers have a brightness setting; verify it is not turned down.
- Inspect connectors: Remove the controller cover and reseat the display ribbon cable or connector.
- Look for corrosion: If moisture has entered the display area, dry it thoroughly and clean any corrosion with contact cleaner.
- Replace display module: If the smoker functions but the display remains unreadable, replace the display/control assembly with a Smokin-It compatible part.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / Control Panel Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements