Charger is physically hot to the touch on the enclosure during or after charging, even at moderate current.

Safety: If the enclosure is too hot to touch comfortably, stop using the charger and turn OFF the breaker until inspected.

• 1. Improve airflow:
  • Ensure the AMPROAD charger is not enclosed in a tight cabinet or covered by objects.
  • Maintain recommended clearances on all sides.
• 2. Shade the unit:
  • If installed outdoors in direct sun, consider adding a shade or relocating to a cooler location (per AMPROAD guidelines).
• 3. Check internal fan:
  • With power ON and charging, listen for the internal fan.
  • If no fan noise is heard when the unit is hot, the fan may have failed and should be replaced.
• 4. Clean vents:
  • With power OFF, remove dust and debris from vents and fan using dry compressed air.
• 5. Reduce current: Temporarily lower the maximum current setting in the app to reduce heat until a permanent fix is implemented.