E18
BYD
Internal Memory / Configuration Corruption
Charger shows E18 and refuses to start; may mention 'internal memory error' or 'configuration fault'.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted EEPROM or flash memory on main control PCB, Interrupted firmware update, Power loss during configuration write, Faulty main controller IC
How to Fix / Troubleshooting
Safety first: Do not attempt to flash firmware without stable power.
- Power-cycle: Turn off the breaker for 5 minutes, then restore power to see if the error clears.
- Factory reset: If available in the BYD interface, perform a factory reset and reconfigure the charger (Wi‑Fi, limits, schedules).
- Reapply firmware: Use the BYD app or service tool to reinstall the latest firmware, following instructions carefully.
- Avoid interruptions: Ensure no power outages or Wi‑Fi drops occur during firmware updates.
- If E18 persists: The main control PCB memory may be permanently damaged and require replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements