Enphase
Noisy Contactor or Power Electronics
Charger makes loud clicking, buzzing, or humming noises during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or vibrating main contactor, Loose mounting hardware, Coil hum from contactor, High-frequency noise from failing power module
How to Fix / Troubleshooting
Note: A single click at start/stop is normal; continuous loud noise is not.
- Identify source: Stand near the charger while it operates and localize whether the noise is from the charger body, cable, or panel.
- Check mounting: Ensure the charger is firmly mounted to the wall and not rattling. Tighten mounting screws if loose.
- Listen to pattern: Rapid repetitive clicking suggests contactor chatter, often due to control or coil issues.
- Reduce load: Temporarily lower current in the app to see if noise decreases, which may indicate stressed power electronics.
- Service if persistent: A technician should inspect the main contactor and power module, replacing noisy or failing components.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Enphase EV Charger Main Contactor and Power Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements