E08
Garo
Locking Mechanism Fault (Type 2 Socket Lock)
Charger displays E08 and will not start charging.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Jammed Type 2 socket locking pin, Failed lock actuator motor, Broken lock position sensor or microswitch, Damaged lock mechanism due to forced cable removal
How to Fix / Troubleshooting
Safety first: Disconnect power before working on the lock mechanism.
- Inspect socket area: Check the Type 2 socket for foreign objects, ice, or debris around the locking pin area. Gently remove any obstruction.
- Listen for lock motor: When plugging in or unplugging (with power ON), you should hear a brief motor sound. If silent, the actuator may have failed or lost power.
- Access lock assembly: With power OFF, remove the front cover and locate the socket lock actuator assembly behind the Type 2 socket. Check wiring to the actuator and lock position sensor/microswitch.
- Manual movement: If possible, gently move the lock pin by hand to ensure it is not seized. Do not force it; if it is stuck, the mechanism should be replaced.
- Replace faulty parts: If the actuator motor or sensor is defective, replace the complete Garo lock assembly or the specific actuator module as recommended by Garo.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Type 2 Socket Lock Actuator Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements