Lectron charger display is on but very dim, flickering, or unreadable, while charging may or may not still function.

Safety first: Turn OFF the breaker before removing the front cover.

• 1. Power reset: Turn OFF the breaker for a few minutes, then ON, to rule out a transient glitch.
• 2. Reseat display connectors: With power OFF, open the unit and reseat the ribbon or harness between the display board and main board. Ensure no corrosion is present.
• 3. Inspect display board: Look for burnt components or cracked solder joints near the backlight driver.

Resolution: If the display remains dim or unreadable, replace the Lectron display board assembly. Charging functionality can sometimes continue without a display, but operation is not recommended without clear status indication.