Lectron charger’s front panel buttons (if equipped) do not respond or respond intermittently, but the display is on.

Safety first: Turn OFF the breaker before removing the front panel.

• 1. Power reset: Turn OFF the breaker for a few minutes, then ON, to rule out a software freeze.
• 2. Inspect keypad cable: With power OFF, open the unit and reseat the keypad ribbon or harness on the display board.
• 3. Check for moisture: Look for condensation or liquid ingress around the front panel. Dry thoroughly and improve sealing if needed.

Resolution: If buttons remain unresponsive, replace the Lectron display/keypad assembly.