NRGkick Complete Power Loss / No Power-Up

Charger does not start at all (no LEDs, no display, no app connection) when plugged into a known-good outlet.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal fuse, Failed auxiliary power supply module, Broken live or neutral conductor in mains plug or adapter, Severed internal wiring harness between plug and PCB

How to Fix / Troubleshooting

Safety first: Do not attempt to open the charger unless you are qualified; internal capacitors can retain charge.

  • 1. Verify outlet:
    • Test the outlet with another high-power appliance.
    • Check that the circuit breaker is not tripped.
  • 2. Try another adapter/outlet:
    • Use a different NRGkick adapter (if available) and a different outlet.
  • 3. Inspect plug and cable:
    • Look for visible damage, bent pins, or loose parts on the mains plug/adapter.
  • 4. If still completely dead:
    • An internal fuse or power supply has likely failed.
    • Contact NRGkick support for authorized service; internal components must be tested and replaced under safe conditions.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Internal Fuse / Auxiliary Power Supply Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements