Webasto
Wi‑Fi Access Point / Radio Failure
Webasto charger cannot be found by the mobile app during setup; Wi‑Fi SSID of charger not visible; no explicit error code on unit.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Disabled Wi‑Fi AP mode in configuration, Failed Wi‑Fi module, Strong interference from nearby networks, Metal enclosure or mounting blocking signal
How to Fix / Troubleshooting
Safety first: Network configuration is low risk, but avoid opening the unit while energized.
- Distance and obstacles: Move closer to the charger with your phone and ensure there are minimal walls or metal objects between.
- Reset network settings: Follow the Webasto manual to reset network configuration (often via a button sequence or power cycle procedure).
- Check 2.4 GHz vs 5 GHz: Some chargers only support 2.4 GHz; ensure your phone is scanning that band.
- Service replacement: If the Wi‑Fi module has failed, a technician may need to replace the communication board or main PCB.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Webasto Wi‑Fi Communication Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements