Digital Avanti freezer beeps intermittently without obvious error code; temperature display may flash.

Safety: None specific; this is typically a user-correctable condition.

Steps:

• Ensure door closure: Check for items blocking the door. Remove obstructions and close firmly.
• Inspect door switch: Locate the door switch (usually at the frame). Press it manually; the alarm should stop and light should turn off. If not, test the switch for continuity and replace if faulty.
• Check door alignment: Adjust hinges so the door contacts the switch plunger squarely.
• Control board: If the switch tests good but the alarm persists, the control board input may be defective and require replacement.