Avanti
No Power / Dead Appliance
Freezer will not start at all; no lights, no display, completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped household breaker or blown fuse, Faulty power cord, Open thermal fuse or line fuse on control board, Failed main control board power supply
How to Fix / Troubleshooting
Safety: Use caution when working with mains voltage. If unsure, contact an electrician or technician.
Steps:
- Check outlet: Test the outlet with another device. Reset any GFCI or breaker if tripped.
- Inspect power cord: Look for cuts, burns, or crushed sections. Replace the cord if damaged.
- Access control board: Remove the rear control cover and inspect for an inline fuse or board-mounted fuse. Test with a multimeter and replace with the same rating if blown.
- Board inspection: Look for burnt components or cracked solder joints. If the board shows visible damage or no low-voltage output, replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements