Display shows AL or a flashing temperature with continuous beeping, interior temperature too high

Safety: No internal electrical work is required for this alarm alone, but always unplug before removing panels.

• Check door closure: Ensure the door closes fully and the gasket seals all around. Remove any items blocking closure.
• Allow recovery time: If a large quantity of warm food was added, set the freezer to Super/Quick Freeze (if available) and allow 12–24 hours for temperature to stabilize.
• Reset alarm: Press the alarm reset or temperature button as described in the user manual. If the alarm returns and temperature remains high, further diagnosis is needed.
• Check for cooling: Verify that the compressor and internal fan are running and that the evaporator gets cold after 15–20 minutes. If not, investigate compressor, fan, or sealed-system issues.
• Call a technician: If the freezer cannot reach set temperature despite running continuously, a sealed-system or compressor fault is likely and requires professional repair.