Belling
Display / Sensor Mismatch
Freezer shows correct temperature on display but food is soft or partially thawed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Sensor located in warmer or cooler spot than food, Display calibration error, Poor air circulation due to blocked vents, Evaporator fan not running consistently
How to Fix / Troubleshooting
Safety: Unplug before internal checks.
Steps:
- 1. Verify with thermometer: Place a separate thermometer among the food and compare to the display.
- 2. Airflow: Ensure vents are not blocked by food and that the evaporator fan runs when the door is closed.
- 3. Sensor check: Confirm sensors are correctly positioned and not touching very cold or warm surfaces directly.
- 4. Component replacement: If the display consistently misreports temperature, replace the relevant NTC sensor or main PCB.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Cabinet NTC Temperature Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements