Belling No Power / Dead Appliance

Freezer will not start at all; no lights, no display, completely dead.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal fuse on PCB, Faulty mains cable or plug, Failed main control PCB power supply, Faulty on/off switch (if fitted)

How to Fix / Troubleshooting

Safety: Unplug the freezer before any inspection. Do not bypass fuses.

Steps:

  • 1. Check outlet and plug: Test the wall socket with another appliance. Inspect the plug and cable for damage.
  • 2. On/off switch: If your Belling freezer has a power switch, test it for continuity and replace if faulty.
  • 3. PCB fuse: Access the main control PCB and check for an onboard fuse. If blown, investigate for shorts before replacing with the same rating.
  • 4. PCB replacement: If the fuse is intact but no low-voltage power is present (no display, no LEDs), the PCB power supply is likely failed and the PCB should be replaced.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Main Control PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements