E10
Bomann
User Interface / Display Board Communication Error
Freezer displays E10 and the display or buttons may not respond correctly; temperature cannot be adjusted.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or damaged communication harness between UI and main board, Failed display PCB, Oxidized connectors due to condensation, Faulty main control board communication driver
How to Fix / Troubleshooting
Safety: Unplug the freezer before removing the control panel or top cover.
Procedure:
- 1. Remove control panel: Carefully unclip or unscrew the front control panel where the display and buttons are located.
- 2. Inspect ribbon cable/harness: Check the cable between the UI board and main PCB for kinks, cuts, or burn marks. Ensure connectors are fully seated.
- 3. Clean connectors: If you see light oxidation, gently clean contacts with electronic contact cleaner and allow to dry completely.
- 4. Visual check of UI board: Look for cracked solder joints at the connector or obvious component damage.
- 5. Reseat and test: Reassemble, restore power, and see if E10 clears and controls respond.
- 6. Replace faulty board: If the harness is intact but the UI remains unresponsive, replace the display/user interface board. If a new UI does not resolve the issue, the main control board may be defective.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements