Excessive frost or ice buildup on the interior walls, baskets, and around the door opening.

Safety: No electrical work is required; keep the unit plugged in unless you need to defrost.

Steps:

• 1. Inspect gasket: Look for tears, gaps, or areas where the gasket does not contact the cabinet. Close a sheet of paper in the door at various points; if it pulls out easily, the seal is weak.
• 2. Clean gasket: Wipe the gasket and mating surface with warm soapy water to remove grease and debris.
• 3. Adjust door: Check hinges for looseness or sagging. Tighten hinge screws and adjust the door so it sits square.
• 4. Replace gasket: If the gasket is deformed or cracked, replace it with a Bomann-compatible door gasket. Warm the new gasket with a hair dryer to help it seat properly.
• 5. Reduce door openings: Minimize how often and how long the door is open to reduce moisture ingress.