Bomann Display Module Failure

Freezer display is blank or segments are missing, but the unit still cools.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LED/LCD display, Loose display connector, Cracked display PCB, Moisture damage behind control panel

Safety: Unplug the freezer before removing the control panel.

Steps:

1. Remove control panel cover: Carefully unclip or unscrew to access the display board.
2. Check connectors: Reseat the ribbon cable or harness between the display and main board.
3. Inspect for damage: Look for corrosion, cracked solder joints, or burnt components on the display PCB.
4. Replace display board: If damage is found or reseating does not restore the display, replace the display/user interface board with a Bomann-compatible part.

Medium 3/5

Display / User Interface Board

Check Price on Amazon

We may earn a commission from links on this page.