Brandt
No Power / Dead Appliance
Freezer not starting at all; no lights, no display, completely dead
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on control board, Faulty power cord, Defective main control board, Tripped household breaker
How to Fix / Troubleshooting
Safety first: Ensure the breaker is off before inspecting the outlet or wiring. Unplug the freezer before opening any covers.
Steps:
- Check outlet and breaker: Test the outlet with another appliance. Reset any tripped breakers or replace blown fuses in the home panel.
- Inspect power cord: Look for cuts, burns, or crushed sections. Replace the cord if damaged.
- Access control board: Remove the rear or top cover to reach the main board. Check for an onboard fuse and test continuity. Replace the fuse only if you also identify and correct the cause of failure.
- If the board shows burn damage or no low-voltage output: Replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Power Cord / Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements