Brandt
Insufficient Cooling / Partial Loss of Capacity
Freezer too warm; food softening, but compressor and fan seem to run
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dirty condenser coils, Condenser fan not running, Door gasket leaking, Early-stage refrigerant leak or weak compressor
How to Fix / Troubleshooting
Safety first: Unplug the freezer before cleaning coils or accessing the rear compartment.
Steps:
- Clean condenser: Pull the unit away from the wall. Vacuum and brush dust from the condenser coils and grille.
- Check condenser fan: Ensure the fan near the compressor runs whenever the compressor is on. Replace the fan motor if it does not run.
- Inspect door gasket: Look for frost patterns near the door and moisture around the seal. Replace the gasket if it does not seal evenly.
- Monitor frost pattern (no-frost models): Remove the interior rear panel and check the evaporator. A small frost patch only at the inlet suggests a sealed system issue requiring a technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor / Door Gasket
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements