Freezer trips the household circuit breaker or RCD when it starts.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Do not repeatedly reset a breaker that trips; this indicates a potentially dangerous fault. Unplug the freezer immediately.
- Inspect mains cable: Check the power cord for cuts, crushed sections, or exposed wires. Replace the mains cable if damaged.
- Check rear components: With power disconnected, inspect wiring around the compressor, start relay, and defrost heater for signs of chafing or burning.
- Dry out moisture: If there has been a spill or defrost water leak, allow the freezer to dry completely for 24 hours before retrying.
If the breaker still trips, the compressor or internal wiring may be faulty and must be tested and repaired by a qualified electrician or appliance technician.