Café Door Alignment / Seal Problem

Freezer door will not close fully or pops open after being shut

Advertisements

Possible Causes

Overloaded door bins, Misaligned hinges, Warped door gasket, Cabinet not level causing door swing

How to Fix / Troubleshooting

Safety first: Avoid pinching fingers when adjusting the door. Have a helper if the door is heavy.

  • Check for obstructions: Ensure shelves and bins are properly seated and not hitting the cabinet when closing.
  • Inspect gasket: Look for twisted or folded sections of the gasket. Warm the gasket gently with a hair dryer and reshape it to improve sealing.
  • Level the unit: Adjust the front leveling legs so the freezer leans slightly back. This helps the door close by gravity.
  • Hinge adjustment: Tighten hinge screws and adjust the door position so it aligns evenly with the cabinet. Replace worn hinge components if necessary.
Advertisements

Repair Difficulty

Easy 2/5

Required Part

Door Gasket
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements