Interior light not working but freezer otherwise cools normally

Safety: Unplug the freezer before removing the light cover or touching wiring.

Steps to restore interior light:

• 1. Check door switch: Ensure the switch operates smoothly and that the freezer recognises door open/closed (e.g. fan stops when door opens). Replace if faulty.
• 2. Remove light cover: Carefully unclip or unscrew the light lens inside the cabinet.
• 3. Inspect LED/bulb: Look for dark spots or burn marks. On LED modules, there may be no visible damage; test with a multimeter or substitute a known‑good module.
• 4. Check connections: Ensure the light connector is firmly seated and wires are intact.
• 5. Replace light module: Fit the correct Caple LED module or bulb and reassemble.

Note: If multiple low‑voltage features fail together, suspect the PCB low‑voltage supply rather than the light itself.