EE
Electrolux
EEPROM / Configuration Error
Freezer displays EE; all temperature indicators may flash and unit may not run.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted EEPROM on main control board, Incorrect control board part installed, Failed firmware storage component, Power surge damage
How to Fix / Troubleshooting
Safety first: Disconnect power before handling the control board.
- 1. Power reset: Unplug the freezer for 10–15 minutes, then plug back in to see if EE clears.
- 2. Verify model and board part number: Ensure the installed control board matches the exact Electrolux model number. An incorrect board can cause configuration errors.
- 3. Inspect board for damage: Look for obvious physical damage or burnt components.
- 4. Replace main control board: If EE persists, replace the main control board with the correct OEM part. Some models may require entering configuration codes; follow the service manual.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements