E17
Essentials
Fast-Freeze Function Control Error
Essentials freezer displays E17 and the unit may not enter or exit fast-freeze mode.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty fast-freeze button or switch, UI board not sending fast-freeze command, Main control PCB logic fault, Wiring issue between UI and main PCB
How to Fix / Troubleshooting
Safety: Disconnect power before opening the control panel.
Steps to troubleshoot E17:
- 1. Check fast-freeze button: Press the fast-freeze/super-freeze button and observe if any indicator lights respond. If the button feels stuck or unresponsive, the keypad may be faulty.
- 2. Inspect UI connections: Remove the control fascia and verify that the fast-freeze button or switch is properly connected to the user interface board.
- 3. Check harness to main PCB: Ensure the multi-wire harness between the UI board and main control PCB is secure at both ends.
- 4. Replace faulty component: If the button assembly is damaged, replace the keypad / UI fascia. If the UI board is not sending signals, replace the user interface PCB. Persistent E17 after UI replacement may require a new main control PCB.
Note: Fast-freeze is a convenience feature; the freezer can often still operate without it, but proper repair restores full functionality.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements