Fagor
Compressor Short Cycling on Overload
Clicking or ticking noise from rear; compressor repeatedly tries to start and stops within seconds.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Weak start relay, Failing compressor, Low supply voltage, Overheated compressor due to dirty condenser
How to Fix / Troubleshooting
Safety first: Unplug the freezer before accessing the compressor area.
- Clean condenser: Vacuum and brush the condenser coils on your Fagor freezer to improve cooling and reduce compressor load.
- Check ventilation: Ensure adequate space around the freezer for air circulation.
- Replace start device: Inspect and replace the compressor start relay/overload if it shows signs of overheating or rattles.
- Monitor voltage: Avoid using extension cords; plug directly into a dedicated outlet. If household voltage is low, consult an electrician.
- Compressor health: Persistent short cycling after these steps suggests a failing compressor requiring professional replacement.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Compressor Start Relay and Overload Protector
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements