Freezer runs but does not reach set temperature; food is soft; compressor runs almost continuously.

Safety first: Unplug the freezer before cleaning coils or accessing fans.

• Clean condenser: Pull the Fagor freezer away from the wall and vacuum the condenser coils and grille thoroughly. Use a soft brush to remove stubborn dust.
• Check door seal: Inspect the door gasket for gaps, tears, or hardened sections. Close the door on a sheet of paper; if it pulls out easily, the seal is weak. Replace the door gasket if necessary.
• Verify fan operation: Ensure the internal evaporator fan runs when the compressor is on. Replace the Fagor evaporator fan motor if it is not operating.
• Check frost pattern: Remove the inner rear panel and inspect the evaporator. A uniform light frost is normal; heavy ice or frost only on a small section suggests a sealed system issue requiring professional service.