Display shows F2; freezer may cycle erratically or show incorrect temperature

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open freezer thermistor, Broken thermistor lead, Unplugged thermistor connector, Failed control board sensor circuit

Safety first: Unplug the freezer before removing any panels.

Check connector: Locate the freezer thermistor connector and ensure it is fully seated.
Inspect wiring: Look for broken or chewed wires (rodent damage is possible in garages or basements).
Test thermistor: Measure resistance at the thermistor. An infinite reading (OL) indicates an open sensor. Replace with a GE-approved thermistor.
Re-test operation: After replacement, restore power and verify that the F2 code clears and temperature control returns to normal.

Medium 3/5

Freezer Thermistor

Check Price on Amazon

We may earn a commission from links on this page.