F4
GE Profile
Defrost Circuit Error
Display shows F4; unit may not defrost or may defrost too frequently
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed defrost heater, Open defrost thermostat, Stuck defrost relay on control board, Wiring issue in defrost circuit
How to Fix / Troubleshooting
Safety first: Unplug the freezer before testing heater or thermostat. These components operate at line voltage.
- Visual inspection: Look for burnt spots on the defrost heater or signs of overheating.
- Test heater: Disconnect heater leads and check for continuity. Replace if open.
- Check defrost thermostat: When cold, it should show continuity. Warm it slightly and verify it opens. Replace if it does not switch correctly.
- Control board evaluation: If both heater and thermostat are good, the main control board's defrost relay may be defective and require replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Defrost Thermostat
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements