F8
GE Profile
Main Control Board Communication or Logic Error
Display shows F8; unit may not cool properly and may not enter defrost
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Internal control board failure, Corrupted firmware, Loose harness connections, Voltage surge damage
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the control board compartment.
- Power cycle: Unplug the freezer for 5–10 minutes, then plug back in. Observe whether the F8 code returns.
- Inspect control board: Access the main control board (often at the rear under a cover). Look for burnt components, bulging capacitors, or corrosion.
- Check harnesses: Ensure all connectors are fully seated and locked in place.
- Surge protection: If the error followed a power event, consider adding a surge protector rated for refrigerators/freezers (if permitted by GE).
- Replace board: If F8 persists and no wiring issues are found, the main control board will likely need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements