Display shows LO or Low Temp; interior may be colder than setpoint and some items may be excessively hard or frosted

Safety first: Use insulated gloves when handling items in an over-cold freezer to avoid skin injury.

• Check set temperature: Confirm the setpoint on the control panel. For most GE Profile freezers, -2°F to 0°F (-19°C to -18°C) is adequate. Raise the set temperature if it is set extremely low.
• Power reset: Unplug the freezer for 2 minutes, then plug it back in to reset the control board. Observe whether the LO indication clears.
• Verify sensor placement: If your model has an exposed thermistor bulb, ensure it is not touching the evaporator coil directly or encased in ice, which can cause false low readings.
• Monitor operation: If the compressor runs almost constantly and LO persists even after adjusting the setpoint, the temperature sensor or main control board may be faulty and require replacement.