E13
Grundig
Evaporator Fan Motor Fault
E13 error, sometimes accompanied by unusual noises from the fan area or lack of air circulation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed evaporator fan motor, Ice obstruction around fan blades, Broken fan wiring harness, Faulty fan driver on main PCB
How to Fix / Troubleshooting
Safety first: Unplug the freezer before accessing the fan area.
Steps:
- Access fan: Remove drawers and the rear interior panel to expose the evaporator and fan assembly.
- Check for ice blockage: Look for ice buildup around the fan. If present, fully defrost the unit and ensure the defrost system is working.
- Spin fan by hand: The fan should rotate freely. If stiff or seized, replace the fan motor.
- Test fan motor: Disconnect the fan connector and measure resistance across the motor terminals. An open circuit indicates a failed motor.
- Inspect wiring: Check the harness from the fan to the main PCB for damage.
- Replace fan motor: Install a new Grundig evaporator fan motor, ensuring correct orientation and secure mounting.
- Reassemble and test: Restore power and confirm the fan runs when the compressor is operating.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements