Grundig
Overheating Electrical Component or Dust on Heater
Freezer emits a burning smell or plastic smell during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dust burning off condenser or defrost heater, Overheating mains connector, Failing compressor winding insulation, Melted plastic near heater or lamp
How to Fix / Troubleshooting
Safety first: If you smell burning plastic or see smoke, unplug the freezer immediately and do not use it until inspected.
Steps:
- Visual inspection: With power disconnected, remove rear and interior panels as needed to look for discoloured plastic, burnt connectors, or melted insulation.
- Clean dust: Vacuum dust from condenser coils and around the compressor and defrost heater.
- Check connectors: Tighten or replace any overheated or burnt connectors, especially at the mains input, compressor, and heater.
- Professional evaluation: If you cannot locate the source or suspect compressor or wiring damage, contact a qualified technician before using the appliance again.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Mains Connector / Defrost Heater Wiring
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements