Indesit Defrost Sensor Error

Freezer shows E2 and may not defrost correctly; frost accumulates on the back wall.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defrost NTC sensor failure, Broken sensor wiring, Poor contact at connector

Safety first: Unplug the freezer and protect against water from melting ice.

Steps:

Access the evaporator by removing the internal rear panel.
Locate the defrost NTC sensor attached to the evaporator tubing.
Test its resistance; if open or shorted, replace with the correct Indesit defrost sensor.
Secure the new sensor in the same position and route the wiring away from sharp edges.

Medium 3/5

Defrost NTC Sensor

Check Price on Amazon

We may earn a commission from links on this page.