Indesit No Power to Appliance

Freezer shows no lights or display, completely dead, but power outlet is confirmed working.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown internal fuse on PCB, Faulty mains switch, Broken mains cable, Failed main control board power supply

Safety first: Unplug the freezer before opening any covers. Only persons competent with electrical safety should test live circuits.

Steps:

Check the mains cable for damage and test continuity from plug to entry point.
Access the main PCB and inspect for an onboard fuse; test and replace with the same rating if blown, but investigate cause of failure.
Test the mains on/off switch (if fitted) for continuity when switched on; replace if open.
If the PCB shows burn marks or the power supply section is clearly damaged, replace the main control board.

Hard 4/5

Main Control Board (PCB)

Check Price on Amazon

We may earn a commission from links on this page.