E6
KitchenAid
Door Switch or Door Input Circuit Error
Display shows E6; interior lights or fans may not respond correctly to door opening.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door switch, Broken door switch wiring, Loose connector at control board, Defective main control door input
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the door switch or accessing the control board.
- Step 1 – Test door switch function: With the door open, press the switch plunger in and out. The interior light should turn on and off. If it does not, the switch may be faulty.
- Step 2 – Inspect switch and wiring: Pry the switch out of the liner carefully. Check for broken wires or loose connectors.
- Step 3 – Replace switch if needed: Install a new KitchenAid-compatible door switch, reconnect wiring, and snap it back into place.
- Step 4 – Check control connections: If the switch tests good, inspect the wiring harness connection at the main control board for looseness or corrosion.
If E6 persists after replacing the switch and verifying wiring, the main control board may require replacement by a professional.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Freezer Door Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements