Freezer will not start at all; display is blank and no lights or sounds.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Do not attempt internal electrical repairs unless you are qualified. Always unplug before inspecting the cord or control.
- Step 1 – Check breaker and outlet: Verify the circuit breaker is not tripped. Plug a lamp or tester into the outlet to confirm power.
- Step 2 – Inspect power cord: Look for cuts, burns, or crushed sections. If damaged, the cord must be replaced.
- Step 3 – Try another outlet: Temporarily plug the freezer into a different known-good outlet (no extension cords) to rule out outlet issues.
If the unit remains completely dead with a good outlet and cord, the main control board or internal wiring may have failed and should be serviced by a technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.