Magic Chef
Keypad / Control Panel Failure
Freezer displays temperature but buttons do not respond; cannot change settings.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed touchpad or button board, Stuck button due to spill or condensation, Loose ribbon cable to main board
How to Fix / Troubleshooting
Safety: Unplug the freezer before opening the control panel.
Steps:
- Power reset: Unplug for 5–10 minutes and plug back in. Sometimes this clears a locked control.
- Inspect control panel: Remove screws and gently pull the panel forward. Check for moisture, corrosion, or sticky residue on the keypad area.
- Check ribbon cable: Ensure the cable between the keypad and main board is fully seated and not damaged.
- Dry and clean: If moisture is present, dry thoroughly and clean with a soft cloth. Do not soak the electronics.
- Replace keypad/UI board: If buttons remain unresponsive, install a new user interface board compatible with your Magic Chef model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements