Magic Chef Evaporator Fan Motor Bearing Wear

Freezer interior is very noisy with a high-pitched squeal or chirp, especially when the door is opened or closed.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn evaporator fan motor bearings, Fan blade rubbing on housing due to ice or misalignment

How to Fix / Troubleshooting

Safety: Unplug the freezer before accessing the fan. Evaporator fins are sharp.

Steps:

  • Confirm noise source: Open the door while the unit is running. If the noise changes or stops when the door switch is pressed (stopping the fan), the evaporator fan is the source.
  • Access the fan: Remove shelves and the rear interior panel to expose the fan.
  • Check for ice: Remove any ice buildup around the fan shroud and blades using warm air.
  • Inspect fan alignment: Ensure the blade is centered in the shroud and not rubbing. Adjust if necessary.
  • Replace the fan motor: If the noise persists or the motor feels rough when spun by hand, replace the evaporator fan motor and transfer the blade if needed.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Evaporator Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements