E8
Maytag
Condenser Fan Motor Error
Display shows E8; condenser fan may not run and compressor area feels very hot.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Fan blades obstructed by debris, Wiring harness damage near compressor, Faulty control board output to fan
How to Fix / Troubleshooting
Safety first: Unplug the freezer before working in the compressor compartment.
- Access rear compartment: Remove the lower rear access panel to expose the condenser fan motor and compressor.
- Inspect fan: Check for dust, insulation, or objects blocking the fan blades. Clear any obstructions.
- Spin test: Turn the fan by hand. If it is stiff or does not spin freely, replace the fan motor.
- Electrical test: With power disconnected, test the fan motor for continuity. Replace if open. Inspect wiring for burns or cuts.
- Control output: If the fan motor is good but never runs while the compressor is on, the electronic control board may be faulty.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements