Maytag
Insufficient Cooling – Long Run Time
Freezer runs but does not get cold enough; temperature stays above 10–20°F.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dirty condenser coils, Weak compressor, Low refrigerant charge from leak, Evaporator fan not circulating air properly
How to Fix / Troubleshooting
Safety first: Unplug the freezer before cleaning coils or accessing fans.
- Clean condenser coils: Pull the unit away from the wall. Use a coil brush and vacuum to remove dust from the condenser coils and compressor area.
- Check door gasket: Inspect for gaps, tears, or hardened sections. Replace the door gasket if it does not seal tightly.
- Verify fan operation: Ensure both the evaporator fan (inside) and condenser fan (rear) run when the compressor is on.
- Look at frost pattern: Remove the interior back panel and inspect the evaporator. A full, even frost pattern is normal; a partial frost pattern suggests a sealed system issue requiring a professional.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Condenser Coil Brush (maintenance tool)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements