Freezer interior light not working but cooling is normal.

Safety: Unplug the freezer before replacing bulbs or LED modules.

Steps to restore interior lighting:

• 1. Check door switch: Press the door switch manually; if the light does not come on but the switch also controls the fan, see if the fan responds. Replace the switch if it is intermittent.
• 2. Replace bulb or LED module: Remove the light cover and inspect the lamp or LED module. Replace with a compatible New World part.
• 3. Inspect wiring: Ensure the light connector is firmly seated and wires are not damaged.
• 4. PCB driver: If a new lamp/LED and switch do not restore light, the main control PCB light driver may have failed and the board may need replacement.

Note: Use only the specified wattage and type of lamp to avoid overheating the light housing.