RCA
No Power or Control System Failure
RCA freezer not cooling at all; interior is room temperature, compressor and fans are not running.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped household breaker or blown fuse, Faulty power cord, Failed main control board, Open thermal fuse (if equipped on some RCA models)
How to Fix / Troubleshooting
Safety first: Do not attempt repairs with the unit plugged in. Use a non-contact voltage tester if available.
Steps to restore power:
- 1. Check outlet: Plug a lamp or small appliance into the same outlet to confirm it has power. Reset the breaker or replace the fuse if needed.
- 2. Inspect power cord: Unplug the freezer and examine the RCA power cord for cuts, burns, or crushed sections. If damaged, replace the cord set.
- 3. Verify control settings: Ensure the temperature control is not set to OFF or at the warmest setting. On mechanical-dial models, turn the dial from OFF to a mid-range setting and listen for a click.
- 4. Check internal wiring (advanced): Remove the rear lower panel and inspect the wiring harness to the control board and compressor. Look for loose connectors or burned wires.
- 5. Test main control board: If the outlet and cord are good but no lights or fans work, the main control board may not be supplying power. Board testing and replacement are best handled by a technician.
Warning: If you smell burning or see scorch marks on wiring or the board, leave the unit unplugged and contact a professional.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements