RCA freezer temperature display does not match actual temperature measured with a thermometer.

Safety first: Unplug the freezer before accessing sensors or the control board.

Steps to correct reading:

• 1. Verify with reliable thermometer: Place a quality freezer thermometer in the center of the compartment and allow several hours for stabilization.
• 2. Compare readings: If the display is off by more than a few degrees, the sensor or control may be inaccurate.
• 3. Inspect thermistor: Locate and test the cabinet thermistor as described for E1. Replace if resistance does not match expected values.
• 4. Check sensor placement: Ensure the sensor is not touching the evaporator coil or walls, which can skew readings. It should sense cabinet air temperature.
• 5. Control board: If a new sensor does not correct the discrepancy, the control board's calibration may be off and require replacement.

Tip: Always rely on an independent thermometer to verify freezer performance.