Summit
Condenser Fan Failure
Condenser fan at the rear of the freezer does not run while compressor is operating.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Obstruction in fan blades, Loose or broken fan wiring
How to Fix / Troubleshooting
Safety warning: Unplug the freezer before working near the compressor and fan.
Steps to fix condenser fan issues:
- Access rear compartment: Remove the rear lower panel to expose the condenser fan.
- Check for obstructions: Remove any debris or objects blocking the fan blades.
- Test fan motor: Spin the fan by hand; it should move freely. Measure resistance across the motor leads; an open reading indicates a failed motor.
- Inspect wiring: Ensure the fan is properly connected to the harness and that wires are not damaged.
- Replace fan motor: Install a Summit-compatible condenser fan motor if faulty. Secure the fan blade and ensure correct rotation.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements