Summit
Display Power or Backlight Failure
Digital display is blank or flickering, but the freezer still seems to cool.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed display PCB, Loose harness to display, Low voltage from main control to UI
How to Fix / Troubleshooting
Safety first: Unplug the freezer before removing the control panel.
Steps to restore display:
- Check for child lock or dim mode: Some Summit models have a display lock or dim feature. Consult the user manual to ensure it is not simply in a low-power mode.
- Access display panel: Remove screws securing the display/control panel and gently pull it forward.
- Inspect connectors: Ensure the wiring harness or ribbon cable is fully seated and not damaged. Reseat connectors.
- Examine display board: Look for burnt components or cracked solder joints. If present, replace the display board.
- Replace display PCB: Install a Summit-compatible user interface board if the original is faulty. Reassemble and test.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements