Vissani
Short Cycling – Control or Overload Issue
Freezer cycles on and off rapidly (short cycling), running for only a minute or two at a time.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Overheating compressor causing overload to trip, Faulty compressor start relay, Defective main control board cycling incorrectly, Poor ventilation around unit
How to Fix / Troubleshooting
Safety: Unplug the freezer before accessing compressor components.
Steps:
- Improve ventilation: Ensure there is adequate clearance around the freezer and that vents are not blocked.
- Clean condenser: Remove dust from condenser coils and fan area to improve cooling of the compressor.
- Inspect start relay: Replace a suspect compressor start relay and start capacitor if they show signs of overheating.
- Monitor: After cleaning and replacing start components, observe operation. If short cycling continues, the compressor or main control board may be at fault and require professional diagnosis.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Compressor Start Relay
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements