Door does not close or seal properly; it pops open or leaves gaps

Safety: Unplug the freezer if you will be removing the door or hinges.

Steps:

• Check for obstructions: Ensure baskets or tall items are not preventing the door from closing fully.
• Inspect hinges: Tighten hinge screws and check for bent hinge arms. Replace damaged hinges.
• Gasket inspection: Look for twisted or compressed sections. Warm the gasket gently with a hair dryer on low and reshape it by hand to improve sealing.
• Level the unit: Make sure the freezer is slightly tilted back so the door closes by gravity.
• Replace gasket: If the gasket is torn or will not seal after adjustment, install a new OEM Whynter door gasket.

Tip: After gasket replacement, close the door for several hours to help the new gasket conform to the cabinet.